1. Disconnect the gearset wires 2. Pop out the wheel cover cap for both

rear wheels

3. Hold one side of the bolt and unscrew 4. Remove the bolt counterclockwise

the other side of the bolt on the axle

(You do need to have two people to do this)

5. Remove the rear axle and tire 6. Remove the gearbox

7. Get a new gearbox 8. Put the rear axle into the gearbox

9. Push the gearbox into the hole of the 10. Push the real axle all the way to the

rear end other side of the gearbox

11. Put on the wheels 12. Make sure you put the nuts and screws

on top of the rear axle

13. Hold one side of the bolt and tighten 14. Connect all the gearset wires

the other side of the bolt clockwise

(You do need to have two people to do this)